On this page
Match the code to the printer's dots Sending the code to the printer Direct thermal vs thermal transfer Label tips Questions- Make each module a whole number of printer dots.
- At 203 DPI, aim for 4 dots (0.5 mm) per module.
- Thermal transfer lasts; direct thermal fades.
Match the code to the printer's dots
Thermal printers usually print at 203 DPI (8 dots per millimeter) or 300 DPI (about 12 per millimeter). A module that's 3.5 dots wide can't be printed; the printer rounds some modules up and some down, and the code looks uneven.
| Printer | One dot | Good module sizes |
|---|---|---|
| 203 DPI | 0.125 mm | 3 dots (0.375 mm), 4 dots (0.5 mm), 5 dots (0.625 mm) |
| 300 DPI | 0.085 mm | 5 dots (0.42 mm), 6 dots (0.51 mm), 7 dots (0.59 mm) |
Multiply by the number of modules to get the code width. A 25×25 code with a 4-module border is 33 modules, so at 4 dots per module on a 203 DPI printer it's 132 dots, or 16.5 mm.
Make a label code with square dots, which print cleanest on thermal printers.
Make a label codeSending the code to the printer
- Label software: most label design apps have a built-in QR element. Paste your link there for a perfectly aligned code.
- Using an image: export a PNG whose pixel size is an exact multiple of the module count, and place it at 100% with no smoothing. SVG also works in software that rasterizes it at the printer's resolution.
Direct thermal vs thermal transfer
| Direct thermal | Thermal transfer | |
|---|---|---|
| How it prints | Heat darkens special paper | Heat melts ink from a ribbon |
| Lifespan | Months; fades with heat and sunlight | Years |
| Best for | Shipping labels, receipts | Product labels, assets, outdoor use |
Label tips
- Keep the 4-module quiet zone clear of the label edge and other text.
- Use square dots and error correction Q or H for labels that get handled.
- Polyester or polypropylene labels resist water and scuffs better than paper.
- Not sure of the size? Use the QR code size calculator.
Questions
What size QR code can a thermal printer print?
At 203 DPI, about 1.5 to 2 cm wide for a short link, with each module 4 printer dots (0.5 mm).
Why do QR codes from my label printer look uneven?
The module size isn't a whole number of printer dots. Resize the code so each module is exactly 3, 4 or 5 dots wide.