Guides / Print and packaging

QR codes on cans, bottles and curved surfaces

On a curved surface the sides of the code bend away from the camera and get squashed. Keep the code no wider than about a third of the container's diameter, and use error correction H.

2 min readPrint and packaging
On this page Why curves cause trouble The one-third rule The curve fights the size limit Placement tips Questions
In short
  • Keep the code under about a third of the diameter.
  • Use the straight part of the container.
  • Square dots, error correction H, matte finish.

Why curves cause trouble

A camera sees a curved code from the front. The middle looks normal, but the edges wrap away, so the outer columns of dots look narrower than the middle ones. Past a point, the scanner can't line up the grid.

The one-third rule

Keep the code's width under about one third of the container's diameter. At that width the edges of the code turn only about 20 degrees away from the camera, which scanners handle well.

ContainerDiameterMax code width
Lip balm or vial15 mm5 mm (too small; use a flat cap or tag)
Slim can (250 ml)53 mm17 mm
Standard can (330 ml)66 mm22 mm
Wine bottle75 mm25 mm
Coffee cup80–90 mm27–30 mm
Paint tin110 mm36 mm

This is a rule of thumb from the geometry, not a standard. Test a printed sample on the real container.

Use the packaging preset: square dots and error correction H hold up best on curves.

Use packaging preset

The curve fights the size limit

A small code needs big dots to scan, and a curve limits how wide the code can be. So keep the content short: a short link on your own domain gives the fewest, biggest dots. See minimum QR code size.

Placement tips

Questions

How big can a QR code be on a can?

As a rule of thumb, no wider than about a third of the diameter: around 22 mm on a standard 66 mm can.

Will a QR code scan on a bottle?

Yes, if it's small relative to the bottle's diameter, on the straight part of the bottle, and not on a glossy area.